Oak Orchard Canoe and Kayak - over 1400 New/Used Canoes And Kayaks - sales, rentals repair paddles Accessories, carriers kayak & canoe carts

- Family owned for over 50 years -
Oak Orchard Canoe Kayak Experts
- Open year round -
www.OakOrchardCanoe.com
Phone Order Hotline (10am-6pm EST) ..................(800)452-9257
email us: oakorchardcanoe@rochester.rr.com
"Waterport Store" (between Rochester and Niagara Falls)
Store Hours: M,W,TH,FR: 10am to 6pm. SAT:10am to 5pm.
2133 Eagle Harbor Waterport Rd
Waterport, NY 14571
(for gps use Albion, NY 14411)
ph; 585-682-4849

"Welcome to the BIGGEST - LITTLE canoe and kayak shop in the world"

shipping & return policy

Your search returned 73 results.

Search results for: seat. Page 1 of 8

Old Town Padded Kayak Seat
We have used this seat in Loons, Dirigos, Vapors, Herons, Otters and many other kayaks.
Makes a great replacement OR upgrade seat with comfort and very good back support.
Notice the backrest is tall, well padded.
You can easily adjust the backrest with the support straps on each side.
The second pic is a custom Bell/northstar Rob Roy solo canoe we upgraded several years ago for our customer.
Third pic shows factory mounting in an Old Town Dirigo 106 or 120.
Typically, this seat is installed by bolting through the side wall of the kayak and through the vertical support arms.
Depending on kayak width and depth these support arms may be angled so they are vertical from the seat pan
(this makes them about 20.5" wide, at which they are @ 8" above the floor),
OR the support arms may be tilted outward to accommodate a wider kayak hull (up to about 30" wide, at which they are @ 6" above the floor).
We have found that this seat is Easily adapted to various kayak models [where our customer wanted to upgrade from their old kayak seat]
AND even some solo canoes [where our customer thought the standard canoe seat was too high and tippy].
Seat Pan: 18" wide, 20" long and about 2" thick.
Support Arms: 6" high, L: 9" long.
Backrest: 15" high, W: 12" wide.

$139.95

$17.95 shipping & handling to 48 States
NY residents add 8% sales tax

Deluxe Flex Kayak Seat
The Deluxe Flex seat is an upgrade to the standard Flex seat that came in Old Town Trip, Heron, Vapor and Twin Heron kayaks for many years...
The Deluxe Flex seat is clearly better than the older standard seat in many ways.
The Backrest of the Deluxe Flex is more sturdy and also more comfortably shaped and more padded than the standard backrest.
The seat pan of the Deluxe Flex is more comfortably shaped and more padded than the standard seat pan. Mounting the new seat is very easy in these models since it mounts the same way as the old one.

The mounting brackets that hold this seat are bolted into the kayak vertically through the kayak deck, next to the cockpit combing (two holes per side; @ 3" on center, front to rear).
Each bracket is about 8.5" tall when measured from a flat floor.
NOTE; the mounting brackets for this seat need to be mounted about 23" to 26" apart from each other. Center to center bolt width is 24.5" but the seat mounting brackets can FLEX in or out; as narrow as 23" or as wide as 26".
(For this you would measure from a seat mounting screw on one side, across your kayak's cockpit, to a seat mounting screw on the other side).
The base of the Seat Pan is about 21" Long and 20.5" wide. The top side of the seat pan is a bit less than that.
The Backrest is Large and nicely contoured; 15" wide and 11" tall. The top of the Backrest measures 15" above a flat floor.
If you have questions on how this seat may work in your kayak you may call our customer service with questions at ph;(585)682-4849.
The Deluxe Flex seat pictured at left is in an Old Town Vapor. We have also used this seat in the Necky Rip and Old Town's Heron and Loon 106, Loon 126 and the latest generation of Loon 120.
Kayaks vary; this seat does not fit in all kayaks.
YOU need to measure YOUR particular kayak to see if this seat's 23" to 26" mounting width will fit.

$139.95

$17.95 shipping & handling to 48 States
NY residents add 8% sales tax

click to picture enlarge

ACS2 Seat for Old Town Kayaks
Finally, after many requests and a great deal of begging... The factory has agreed to offer the next level of comfort in a kit form... Active Comfort System 2 (ACS2).
ACS2 is clearly better than the older ACS seats in many ways. This is the current and best type of seat used in the best Old Town models that have wider cockpits.
Designed for all day comfort the ACS2 seat features a visible, intuitive adjustment system, multi-laminate construction for optimal support and softness. Enhanced seating surface gives superior air-flow and drainage. This sturdy new seat provides that "one with the boat" feeling along with tremendous comfort.
This four-way adjustable seat tailors individual backrest height, thigh support, lumbar support and backrest angle to provide a truly customized ride.
ACS2 seat kit will replace your old time seat. Also replaces the grey Extrasport Xtra Comfort seats in Old Town kayaks that have wider cockpits.
If you have an older Dirigo kayak with Extrasport Xtra Comfort seats AND ratchet control knobs (these knobs are in the way and need to be removed). Note we have also used the smaller ACS2 seat is some Dirigo kayaks. (measure your kayak carefully for depth below screw holes and distance across cockpit screw to screw.)
The mounting brackets that hold the seat are bolted into the kayak vertically through the kayak deck, next to the cockpit combing (two holes per side; @ 3" on center, front to rear).
Each mounting bracket is about 4.75" above the seat pan, OR 9" above a flat floor but they can be adjusted 1/2" higher OR 1" higher to accommodate different kayak depths. We sell Optional extra mounting brackets for this seat that are one inch shorter, and still adjustable like the standard bracket.
NOTE; the standard mounting brackets for this seat need to be mounted about 21.5" to 24" apart
(For this measure from a seat mounting screw on one side, across your kayak's cockpit, to a seat mounting screw on the other side).
This seat's mounting brackets have inner mounting holes designed for self tapping screws at 21.5" apart AND outer mounting holes designed for nut/bolts up to 24" apart. You may choose to use either the screw hole OR bolt hole, as you see best for your kayak. Mounting screws are included.
This ACS2 Seat Pan is about 17" Long and 20.5" wide.
Overall seat length is 20" and overall seat width is 23". Foam pads on the bottom of this seat may be shaved down, OR added to, in order to fit hull shape.
The backrest is 11" tall by 15" wide, contoured for lumbar support, adjusts up/down, adjusts for lean.
If you have questions on how this seat may work in your kayak you may call our customer service with questions at ph;(585)682-4849.
The ACS2 pictured at left is in an Old Town Vapor. We have used this seat in the Old Town's Heron and the new Loon 106, 120, 126 and the NECKY Rip 10 and 12.
Kayaks vary... this seat does not fit in all Old Town kayaks. It may be too wide or deep for some models but we do offer 2 smaller versions (lower on this page) for less wide or less deep Old Town models.
YOU need to measure YOUR particular kayak to see if this seat's 21.5" to 24" seat bracket mounting width will fit.

$299.95

$17.95 shipping & handling to 48 States
NY residents add 8% sales tax

ACS2 Seat -small
This is a smaller version of the ACS2 seat, for Old Town or Necky kayaks with a less wide OR less deep cockpit.
This seat is adjustable, so it fits Large or small paddlers great.
ACS2 is clearly better than the older ACS seats in many ways. This is the current and best type of seat used in the best Old Town and Necky models that have less wide cockpits.
Designed for all day comfort the ACS2 seat features a visible, intuitive adjustment system, multi-laminate construction for optimal support and softness. Enhanced seating surface gives superior air-flow and drainage. This sturdy new seat provides that "one with the boat" feeling along with tremendous comfort.
This four-way adjustable seat tailors individual backrest height, thigh support, lumbar support and backrest angle to provide a truly customized ride.
ACS2 seat kit will replace your old time seat. Also replaces the grey Extrasport Xtra Comfort seats in older Necky and Old Town kayaks.
If you have an older Dirigo kayak with Extrasport Xtra Comfort seats AND ratchet control knobs (these knobs are in the way and need to be removed, we generally just put a bolt in the hole where the knob was.)
The brackets that hold the seat are bolted into the kayak vertically through the kayak deck, next to the cockpit combing (two holes per side; @ 3" on center, front to rear).
Each bracket is about 4.5" tall (from the seat pan) but it can be adjusted 1/2" higher OR 1/2" lower to accommodate different kayak depths.
NOTE; the mounting brackets for this seat need to be mounted about 18.75" to 21.5" apart.
(For this measure from a seat mounting screw on one side, across your kayak's cockpit, to a seat mounting screw on the other side).
This seat's mounting brackets have inner mounting holes designed for self tapping screws at 18.75" apart AND outer mounting holes designed for nut/bolts up to 21.5" apart. You may choose to use either the screw hole OR bolt hole, as you see best for your kayak.
This smaller ACS2 Seat Pan is about 18" Long and 18" wide.
Overall seat length is 19.25" and overall seat width is 19.75".
Foam pads on the bottom of this seat may be shaved down OR added to, in order to fit hull shape.
The backrest is 9" tall by 14.5" wide, contoured for lumbar support, adjusts up/down, adjusts for lean.
If you have questions on how this seat may work in your kayak you may call our customer service with questions at ph;(585)682-4849.
The ACS2-small seat pictured at left is in an Old Town Sorrento. Another pic shows the ACS2-small seat in the Old Town Dirigo. We have also used this seat in the Necky Manitou Sport.
Kayaks vary; this seat does not fit in all kayaks.
YOU need to measure YOUR particular kayak to see if this seat's 18.75" to 21.5" seat bracket mounting width will fit.

$299.95

$17.95 shipping & handling to 48 States
NY residents add 8% sales tax

click to picture enlarge

ACS2 Seat, Narrow
This is a smaller version of the ACS2 seat, for Old Town or Necky touring kayaks with a narrow mounting bolt width, and less wide OR less deep cockpit.
This seat is adjustable, so it fits Large or small paddlers great.

ACS2 is clearly better than the older ACS seats in many ways. This is the current and best type of seat used in models that have smaller cockpits and a narrow seat bolt width.
Designed for all day comfort the ACS2 seat features a visible, intuitive adjustment system, multi-laminate construction for optimal support and softness. Enhanced seating surface gives superior air-flow and drainage. This sturdy new seat provides that "one with the boat" feeling along with tremendous comfort.
This four-way adjustable seat tailors individual backrest height, thigh support, lumbar support and backrest angle to provide a truly customized ride.
ACS2 seat kit will replace your old time seat. Also replaces the grey Extrasport Xtra Comfort seats in some Necky or Old Town touring kayaks.
The brackets that hold the seat are bolted into the kayak vertically through the kayak deck, next to the cockpit combing (two holes per side; @ 3" on center, front to rear).
Each bracket is about 4.5" tall (from the seat pan) but can be adjusted 1/2" higher OR 1/2" lower to accommodate different kayak depths.
NOTE; the mounting brackets for this seat need to be mounted about 17" to 19" apart
(For this measure from a seat mounting screw on one side, across your kayak's cockpit, to a seat mounting screw on the other side).
This seat's mounting brackets have inner mounting holes designed for bolts at 17" apart when flexed inward AND up to 19" apart when flexed outward. Please measure to see if this seat is good for your kayak.
This ACS2 Seat Pan is about 18" Long and 18" wide.
Overall seat length is 19.25" and overall seat width is 19.75". Foam pads on the bottom of this seat may be shaved down OR added to, in order to fit hull shape.
The backrest is 9" tall by 14.5" wide, contoured for lumbar support, adjusts up/down, adjusts for lean.
If you have questions on how this seat may work in your kayak you may call our customer service with questions at ph;(585)682-4849.
YOU need to measure YOUR particular kayak to see if this seat's 17" to 19" seat bracket mounting width will fit.

$299.95

$17.95 shipping & handling to 48 States
NY residents add 8% sales tax

ACS2 Seat Brackets, pair
This is one pair of 6 inch Seat Brackets to fit the ACS2 seats. Also includes one pair of strap guides to hold your backrest strap in place.
The brackets that hold the seat are bolted into the kayak vertically through the kayak deck, next to the cockpit combing (two holes per side; @ 3" on center, front to rear). Each style bracket is 6 inches tall overall. They can be adjusted 1/2" higher OR 1/2" lower to accommodate different kayak depths depending which of the 9 holes you put 3 bolts in when connecting the seat.
We have two Bracket types to pick from. Either type is 6 inches tall. Either type will fit on the wider, small or narrow ACS2 seats.
6inch Bracket, Medium mounting width
We use this if the bracket that comes on the wider seat it too tall but your bolting width is ok.
6inch Bracket, Narrow mounting width
This may also be used when the bracket that comes on the wider seat it too tall but since the mounting bolts are to the inside of the bracket this results in a narrower bolting width when used on the wide or small seat.

If you have questions on how these brackets may work in your kayak you may call our customer service with questions at ph;(585)682-4849.

Bracket Style:

$19.95

$6.95 shipping & handling to 48 States
NY residents add 8% sales tax

Old Town Kayak Seat Pad Kit For Vapor Seat
A replacement Pad for Vapor Seat only (a pad for Backrest is sold separately.) Old Town's special design closed cell foam seat pad offers enough pad thickness to make a good day on the water Much more comfortable. The non-slip surface keeps the paddler from sliding around in rougher waters enhancing control of the craft. Durable and easy to clean. This is also used on Old Town Trip or Trip Angler models. Replace your old pad ratty seat pad with a new one.
Note for BEST Fit: Order a light grey seat pad if your Old Town came with a light grey seat pad.
If your Old Town originally came with a black seat pad. That original pad is no longer available. You can use the current black pad or the grey pad but you will need to make new holes in the seat pan that line up with the hole in the new style pad.

This is one pad for the Old Town Vapor kayak seat.
Easy Install. Hardware included.

choose type

$34.95

$8.95 shipping & handling to 48 States
NY residents add 8% sales tax

Old Town Kayak Seat Pad Kit For Vapor Backrest
Pad for Vapor Backrest only; pad for the seat is sold separately.
We see many Vapor kayaks for sale without a pad on the backrest (ouch!). Why not go in style and comfort.
Old Town's special design closed cell foam backrest pad offers enough pad thickness to make a good day on the water Much more comfortable.
Durable and easy to clean. Also used on Old Town Trip models. Replace your old pad.
Note for BEST Fit: Order a light grey back pad if your Old Town came with a light grey seat pad.
Order a black back pad if your Old Town came with a black seat pad.

This is one pad for the Old Town Vapor backrest.
Easy Install. No drilling. Hardware included.

choose type

$29.95

$6.99 shipping & handling to 48 States
NY residents add 8% sales tax

10.

Old Town Kayak Seat Pad Kit For Heron Seat
Pad for Old Town Heron Seat only; pad for Backrest is sold separately. Old Town's special design closed cell foam seat pad offers enough pad thickness to make a good day on the water Much more comfortable. The non-slip surface keeps the paddler from sliding around in rougher waters enhancing control of the craft. Durable and easy to clean. This is also used on other kayak models. Replace your old pad ratty seat pad with a new one. Older models may have never had a seat pad (ouch!)
Note for BEST Fit: Order a light grey seat pad if your Old Town came with a light grey seat pad.
If your Old Town originally came with a black seat pad. That original pad is no longer available. You can use the current black pad or the grey pad but you will need to make new holes in the seat pan that line up with the hole in the new style pad.

This is one pad for the Old Town Heron kayak seat.
Easy Install. Hardware included.

choose type

$34.95

$8.95 shipping & handling to 48 States
NY residents add 8% sales tax

1 2 3 4 5 6 7 8

Home	About us	Canoes	Kayaks	Rentals	Racks	Accessories	Directions	Specials	Used	Contact
Rack Accessories	Gift Certificates	Canoe Paddles	Kayak Paddles	Whitewater Paddles	Care & Repair	Life Jackets	Sprayskirts	Cockpit Covers	Boat Carts	Events
Safety	Canoe seats, parts	Canoe Outfitting	Kayak Outfitting	SitOnTop gear	Storage	Books, dvd, video	Fishing	Danuu covers	Motor mounts	Cool Stuff
Trailers	Clothing, Hats	Canoe Inventory	Kayak Inventory	Our Store	Try-Before-You-Buy	Comments	SUP Paddle Boards	Kayak Roller Loader	Canoe Roller Loader	Clearance
© 1999-2024 Oak Orchard Canoe, Inc. All Rights Reserved. Oak Orchard Canoe Kayak Experts. . We reserve the right to change product specs, change colors, change prices OR correct errors at any time without notice.